Classic Concrete Raised Access Floor

Classic Concrete

Classic, modern style meets functional, flexible design

The Beauty of Simplicity

The STONEWORKS® Classic Concrete access floor panel offers the ultimate combination of aesthetics and functionality that combines robust structural performance into one complete integrated product. Classic Concrete is available with an exposed aggregate (Honed) finish and an eased edge at the surface. As the panel is made from natural products, moderate shade and color tone differences will occur and is the reason this product is assigned a V2 Variation Rating.

STONEWORKS Classic Concrete (Honed) STONEWORKS Classic Concrete (Honed)

Key Performance Characteristics

  • Eased Edge design supported on Heavy-Duty stringers
  • Non-combustible
  • Must be sealed in the field after installation
  • Available in gray with an exposed aggregate Honed finish

Classic Concrete Panels

The STONEWORKS Classic Concrete panel is a concrete slab with an E-Coated steel reinforcing bottom pan and features a honed surface texture. The cement and aggregate provide the panel with structural stability for everyday use. The panel is available in a 2’x2’ module size.

Natural Variation

concrete variations

Classic Concrete from Tate's STONEWORKS line is a natural stone product, and all natural stone products contain some degree of variation, which enhances the natural look of the finish. This variation comes from differences in color or aggregate distribution.
Our finishes line contains several products that fall into one of 3 categories:

  • V1 is slight variation
  • V2 is moderate variation
  • V3 is substantial variation 

Classic Concrete is V2.

Classic Concrete Showcase

Ford Research and Innovation Center - Classic Concrete Ford Research and Innovation Center - Classic Concrete

Product Information

Eased Edge Panel
Access Floor Panels
Installation Guide & Owner's Manual
Architectural Details

Classic Concrete with Eased Edge Datasheet 24in

Classic Concrete with Eased Edge Detail 24in (PDF)

Classic Concrete with Eased Edge Detail 24in (DWG)

Classic Concrete with Eased Edge HD Stringer Spec (4in FFH) 24in

Classic Concrete with Eased Edge HD Stringer Spec (5 - 6in FFH) 24in

Classic Concrete with Eased Edge HD Stringer Spec (7-36in FFH) 24in

Classic Concrete Panels are available on the following understructure system.


STONEWORKS panels are not sealed in the factory however we do recommend that a sealer be field applied to help ensure the long-term performance of the product. There are many sealers on the market and they play an important role in the outcome of the floor. The cost of sealers varies widely, and depending on the chemical makeup of the sealer it will likely affect the STONEWORKS panel’s color, gloss, slip and stain resistance, and overall wearability as well as influence the various maintenance schedules and protocols. Whether the product is used in high traffic walkways & corridors or breakrooms & food/drink prep areas will affect the sealer choice. Therefore, it is important that sealers are evaluated against the application’s specific requirements and specified by the design team in the project specifications.
STONEWORKS panels are cement-based products and are compatible with sealers formulated for concrete or natural stones. The only precaution when evaluating sealers is that much of the information pertains to concrete sealers applied on slabs and not raised floor panels. Viscous sealers tend to fill in the seams of the panels and adversely affect the accessibility of the system. Also, sealers that have a neutral pH and can be applied by spray misting vs. flooding the floor should be considered as both strong chemicals and excess flooding can have a negative impact on the floor.
To assist the design team in their selection of a sealer, we have provided a link to a sealer review site as well as a chart detailing the sealers that have been evaluated by Tate. 
For any sealer selected, a suitably sized mock-up of STONEWORKS panels should be constructed with the specified sealer applied and reviewed by all parties to ensure desired results prior to application on the installed floor system

Concrete Review Link:

Download Sealer Chart for More Info:

Sealer Chart

STONEWORKS® Panel Installation Manual

STONEWORKS® Panel Owner's Manual

Finishes Brochure icon

Tate Finishes Brochure

The Future of Access Floor Finishes is Here!

Tate Product Brochures Icon

Tate Commercial & Data Center Product Guide

Explore Other STONEWORKS® Finishes

Want to Order a Sample?

Classic Concrete samples are just an email away. To request a sample, send an email to

Additional Finish Options

Explore More of Tate

Need to talk? We're here for you.

Our team is ready to help you select the best solutions for your project.

Contact our support team
We use cookies on our website To find out more about the cookies we use, or to change your cookie preferences i.e. to remove your consent to our use of certain categories of cookies, please visit our Cookie Policy & Control page.

Please click “Accept and close” to accept the use of cookies on our website. If you do not click “Accept and close” but continue to use this website: you thereby consent to the use of all Tate cookies and third party cookies for the purposes of improving performance, improving functionality and audience measurement, in accordance with the terms laid out in our Cookie Policy & Control page; and we will assume that you have read and understood our Cookie Policy & Control page.