ConCore 4000 Raised Access Floor Panel

ConCore® 4000

The ConCore® 4000

Tate's ConCore® 4000 raised access floor panel is intended for commercial applications with a heavy total load requirement and is engineered to meet Tate Standards per CISCA testing methods.


Key Performance Characteristics

  • Panel weight : 12.45 lbs/ft² bare
  • All steel welded construction filled internally with a cementitious core material
  • Protected from corrosion by an epoxy paint finish
  • Class A flame spread rating
  • Non-combustible material

System Performance

Tate Standards to CISCA Testing Methods

System Performance Criteria (Tested on Actual Understructure*)

System Type System Weight (lbs/ft2) Static Loads Rolling Loads Impact Loads
Panel Understructure Design Loads1 Minimum
Ultimate Loads
Safety Factor
(min 2.0)2
10 Passes 10,000 Passes
ConCore® 4000
24" Bare

2" Deep

Bolted Stringer

13.95 lbs / ft² 4000 lbs 8000 lbs PASS 2700 lbs 2400 lbs 300 lbs

*All tests are performed using CISCA's Recommended Test Procedures for Access Floors with the exception of Design Load

1. System Design Load is based on permanent set ≤ 0.010” and is verified by loading panels in accordance with the CISCA concentrated load method but with panels installed on actual understructure instead of steel blocks. (Testing on blocks does not represent performance of an actual installation.) Ultimate, Rolling, and Impact Load tests are performed using CISCA Test Procedures.
2. Safety Factor is Ultimate Load divided by Design Load. 

Product Information

Bare Panels
HPL Panels
Installation Guide & Owner's Manual
Architectural Details

ConCore 4000 Datasheet 24in

ConCore Detail (PDF) 24in

ConCore Detail (CAD) 24in

ConCore 4000 Datasheet 60cm

ConCore 4000 Datasheet 60cm

ConCore Detail (PDF) 60cm

ConCore Detail (CAD) 60cm

ConCore 4000 Bolted Stringer spec 60cm

ConCore 4000 HPL Datasheet 24in

ConCore Detail HPL 24in (PDF)

ConCore Detail HPL 24in (DWG)

ConCore 4000 HPL Spec 24in

ConCore 4000 HPL Datasheet 60cm

ConCore Detail HPL 60cm (PDF)

ConCore Detail HPL 60cm (DWG)

ConCore 4000 HPL Spec 60cm

The ConCore® 4000 is available with these finish options:

ConCore & All Steel Owner's Manual

ConCore & All Steel Installation Guide

Finishes Brochure icon

Tate Finishes Brochure

The Future of Access Floor Finishes is Here!

Tate Product Guide

Tate's Product Solutions Guide

Learn more about our Floor-to-Ceiling Solutions

Other ConCore Options

Raised Access Floor Systems

More About Tate

Need to talk? We're here for you.

Our team is ready to help you select the best solutions for your project.

Contact our support team
We use cookies on our website To find out more about the cookies we use, or to change your cookie preferences i.e. to remove your consent to our use of certain categories of cookies, please visit our Cookie Policy & Control page.

Please click “Accept and close” to accept the use of cookies on our website. If you do not click “Accept and close” but continue to use this website: you thereby consent to the use of all Tate cookies and third party cookies for the purposes of improving performance, improving functionality and audience measurement, in accordance with the terms laid out in our Cookie Policy & Control page; and we will assume that you have read and understood our Cookie Policy & Control page.