ConCore® 1000

The ConCore® 1000

Tate's ConCore® 1000 raised access floor panel is intended for data centres with a light total load requirement and is engineered to meet both Tate Standards per CISCA testing methods and Australian Standards.

ConCore Panel

Key Performance Characteristics

  • Panel weight : 37.7kg/m² bare.
  • All steel welded construction filled internally with a cementitious core material.
  • Protected from corrosion by a powder paint finish.
  • Class A flame spread rating.
  • Non-combustible material.

System Performance

Tate Standards to CISCA Testing Requirements

System Performance Criteria (Tested on Actual Understructure*)

      Static Loads   Rolling Loads    
Panel Understructure Design Loads1 Minimum
Ultimate Loads
Safety Factor
(min 2.0)2
10 Passes 10,000 Passes Impact Loads
ConCore® 1000 Corner Lock 4.4kN 8.9kN PASS 3.6kN 2.7kN 0.6kN
ConCore® 1000 Bolted Stringer 4.4kN 8.9kN PASS 3.6kN 2.7kN 0.6kN

*All tests are performed using CISCA's Recommended Test Procedures for Access Floos with the exception of Design Load

1. System Design Load is based on permanent set ≤ 0.010” and is verified by loading panels in accordance with the CISCA concentrated load method but with panels installed on actual understructure instead of steel blocks. (Testing on blocks does not represent performance of an actual installation.) Ultimate, Rolling, and Impact Load tests are performed using CISCA Test Procedures.
2. Safety Factor is Ultimate Load divided by Design Load. 


Technical Documents
Understructure Options
Finish Options

ConCore 1000 Datasheet

ConCore 1000 Detail (CAD)

ConCore 1000 Detail (PDF)

ConCore 1000 CornerLock System Specification

ConCore 1000 Bolted Stringer System Specification

ConCore 1000 UFAD Clip-On System Specification

ConCore 1000 UFAD Bolted Stringer System Specification

ConCore 1000 Panels are available on the following understructure systems in both standard and low finished floor height (LFFH) options:

The ConCore® 1000 is available with these finish options:

Fav Faved

Other ConCore® Panel Grade Options

More About Tate

Need to talk? We're here for you.

Our team is ready to help you select the best solutions for your project.

Contact our support team
We use cookies on our website www.tateinc.com. To find out more about the cookies we use, or to change your cookie preferences i.e. to remove your consent to our use of certain categories of cookies, please visit our Cookie Policy & Control page.

Please click “Accept and close” to accept the use of cookies on our website. If you do not click “Accept and close” but continue to use this website: you thereby consent to the use of all Tate cookies and third party cookies for the purposes of improving performance, improving functionality and audience measurement, in accordance with the terms laid out in our Cookie Policy & Control page; and we will assume that you have read and understood our Cookie Policy & Control page.